Separate names with a comma.
@Toozalii Plenty of disks available online such as Eurocarparts etc at reasonable prices. Also S G Petch. Out of interest, did you use original...
Sam, I’m not an expert by any means and modern fuel injected engines are usually beyond my limited experience but it certainly isn’t down to the...
Pleased to hear it was a relatively simple fix.
I’d start with checking the plugs and coil packs are all good and tight. Perhaps also try the connections to the battery terminals although I’d...
Think about getting it fully undersealed. I had mine done earlier this year for about £500.
I bet the ABS sensor was the cause of my problems last week after the wheel and driveshaft were removed. In order not to steal the thread from...
Mine has got a spoiler but on a car like the Copen it’s aesthetic rather than functional. I don’t expect I’ll be coming up behind this and...
Ah, okay. It will probably require a new unit and then find some way to adjust the odo to the true mileage (km) which would normally be done at...
The alternative solution is this: [ATTACH]
well the Cooen’s thrown me another curve ball ! I live close to a bypass with more roundabouts than enough but have obviously become adept at...
I think you can just buy and fit alternative dials. People on here have changed them for aesthetic reasons so I assume you should be able to buy...
Mine is fine at 75 mph (120 kph) and plenty of revs left. The limiting factor is how much volume is left in the radio because it does get a bit...
I should have added the following which may help others avoid a similarly expensive misdiagnosis. The original autoelectrician noticed that the...
I had the alternator changed on my 1.3 Copen two weeks ago. It took the garage 2 hours as it's not quite as easy as on the turbo in that the...
Looks like they caught the bonnet too. There are a couple of breakers being advertised on ebay.
Is it actually a Cobra fob for the alarm/immobilsor, of which there are 2-3 types fitted to the Copen. If so, you'll need to get the new fob...
Just did mine again at the weekend. The locknut needs to be re-tightened afterwards.
That looks like a useful addition to the toolkit. Are the prongs offset ? The first picture looks like they grab the fixing from the side whereas...
My lights are the same as @JulesAtCumbria although they’re on the front of the grill. The controller works by detecting the voltage increase when...
I’ve got a broken one too that’s still holding up. I think I’ll try the local indie motor shop as they often sell odds and ends. It’s a toss up...
