Separate names with a comma.
Given that you are from Cardiff, this is my reaction: [MEDIA]
I used a german product called "Fluid Film" (kind of a cavity wax like mike sanders, but it does not harden) followed by "Perma Film" (used for...
Avoid driving the car and get an OBD2 Code Reader to figure out whats wrong.
1. there should be round plastic grommets on there. Are they all gone on your Vehicle? 2. Penetrating oil should help - you can use WD40, but...
I personally prefer if cars do not have "all the gadgets", that's why I like my copen so much! But I would not say no to a 7" Touchscreen DVD Radio ;)
Today I took apart my leather seats to paint the metal shell underneath the upholstery. It was very rusty, the guys at Daihatsu didn't paint it....
Well done, but...why? :D
Cast iron Blocks are quite durable. I think it was a good choice. In Germany, we call engines such as the 1.3 liter K3-VE an "iron pig", as they...
Do you think the colour will stay on and not rub off? I also thought about giving my red seats a touch up, but I am worried I will make it worse...
You are right, its a cast iron block with an aluminum head. But this kind of corrosion is not as bad as it looks, it is actually just superficial....
ECU remapping is only for professional people with professional equipment worth a few thousand.
You can still order a new one from Daihatsu, but it is well over 400 quid as far as I can remember. How about cutting a new one from automotive...
Thats a good deal, if I were in the UK, I would seriously think about it :D
In my experience it is better to leave it in an open shelter, not a closed off garage. This way it can "air out" and will not rust so much.
Thanks for the link, this is some good stuff
I found fitting a Belt on the 1.3 quite easy, given the minimal space. I just had to remove the right wheel arch to get to the tensioner screw. I...
Have you ever heard of aluminum corrosion? Very nasty. I would not do it. You could try spray film (Foliatec), it will be 30-40ish quid and you...
We had someone a while back on another copen forum, their fix for the problem was to carry a mobile OBD2 reader in the glovebox to clear the check...
I have 14 and 15 inch original equipment Daihatsu alloys with 165/50 R15 and 165/60 R14 tyres. To be quite honest I do not feel much of a...
I know from experience that many body parts come directly from Japan, takes a week or two if they are in stock. As for service parts such as disk...
