Separate names with a comma.
I'd change the oil after you decide to drive it again. Maybe have your husband drive it every now and then :D Otherwise: What BarnsleyRob said
The presenter said every car will rust from the inside out, be it old or new. He said the sill looked good but because of condensation there is...
[MEDIA] This might be useful to you (even though its German - the automatic subtitles are funny). Not only can you see the insides of the sills(I...
I took some pictures from you (Sorry, my car is dirty, we had lots of rain lately) I still do not know if its supposed to be like this, but at the...
I also have the square holes, but there are round plastic grommets on all of them (i think). I removed them to spray cavity wax/oil into the...
There should be a few round plastic grommets on the sills to keep water from going in. If there are some missing you should definitely look for...
The 1.3 and the 0.6 are basically identical apart from the engine. Just draining the oil is very easy, you just need to undo one bolt. Changing...
I just had to look up where guernsey is, well, good luck :D
The plastic divider is just for optics, however, there is a hole underneath it so you should get it fixed if there is any possibility of water...
Hello If its from 2003 it might be one of the first, definitely a 660cc turbo that needs and oil change evers 3000 miles or half year. You can get...
Maybe you have a leak somewhere? A soundfile/video would certainly help
Get a shiny chrome one and you can even sell it as an upgrade :D frontgrille V2A mesh
Dzien Dobry!
NOICE ONE BRUVVA (see Signature)
The Copen is quite safe for its size, but the repair costs are always huge. I do not know the legislation in the UK, in Germany the repair can...
I don't know how much its going to cost, not too much probably. I would go for welding in new metal and sealing the whole car with rust...
Yes, I have thought about that, it should be easily doable with additional piping. but you would have to maufacture some kind of holding mechanism...
There are no alloys with the stock spec. Its 4,5Jx15 offset 45mm A 6.5x15 alloy can also be fitted, but you have to pay attention that the MOT...
Thanks again jcuyckens for the explanations, I have attempted to manufacture an intake using the following: 53mm plastic gutter pipe and a 45°...
Im a bit envious because of your perfectly fitting plates. There are no such plates allowed where I come from and its a pain
