Separate names with a comma.
Yes the regulator is part of the tank saddle, and you must use it. If you have not regulated your fuel rail system, there is a possibility you...
What do you want to know, I will post you the relevant sections. Bear in mind there are quite a few ancillary differences between the mira and...
Does it have an aftermarket alarm on it? Check every fuse just to be sure. Especially fuse 7 (engine bay) and 3 (in the car) Unplug the hazard...
I like that idea, it removes the assumption factor.
Nah, its a vent pipe, so if the header tank overfills it spews coolant out of this pipe.
In all honesty what you are doing is beyond my field of expertise. My typical game is hacking milages, immo data and radio codes, which is all...
You would have thought so! But life dunna always work like that for me very often :-(( But persistence, faith and intelligence get results.
Pretty much most of the body work repairs I see on a weekly basis are poor at best, they will only last a couple of salty UK winters before the...
Yep, bring me your copen! I have just fixed this one last week:- https://www.youtube.com/watch?v=jR8YmgPbKMk Took me about 8 hours to solve...
You need to connect to the gearbox ECU and data log / real time stream data from it, so you can see what is working and what isn't. You will be...
With the proper Daihatsu Diagnostic machine you can talk to the gearbox ECU. With it flashing at the moment it is trying to tell you something!...
All sounds pretty reasonable really! Inject some strings and see what happens. Nothing to lose. Very good work.
I've never had to do this on a Copen yet. But 35mA is quite a high standby load for such a simple basic vehicle. It wouldn't surprise me if it...
Nice prep work - nice paint booth!
I love this post! [IMG]
When you get badly corroded areas, the pads will not clean it. And if they do the disk material will be a mess. First I take the corroded disk...
Put a current/ammeter on it and see what its standby load is like. Could have fault on a system somewhere. Copens are not great for parked...
Make sure you measure the ring lands and bore to make sure it is still in spec.
Pull the slugs out of it and clean the ring lands up. Obviously you'll need to take the head off first!
Tidies the seat up nicely that does.
