Separate names with a comma.
https://www.google.co.uk/search?q=schutz+underseal&hl=en-GB&prmd=sivn&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjO44qsttrOAhVLmBoKHSouBbUQ_AUICCgC&biw=1...
I use a schutz type treatment but one with added waxy oils. This is the small 1 litre can that you attach to a purpose made spray gun and a small...
Sorry I was not trying to make sarcastic post
There must be somewhere in Coventry that can still repair a radiator. Back streets used to be full of them.
As above with circa 750 idle when warm but smooth, no shuddering.
Rust prevention failing after 3 months doesn't seem right. Maybe you left a little rust behind 3 months ago? Retreat with a rust converter and...
I wet sand to 5000 grit then polish with something like T Cut finally move to a restoration polish and a duck down power mop.
They always fit in the garage nicely.
You're going to have fun, our (my) Copen was brought as a Sunday car for the wife. Took a few days for it to become "our" car. Its now...
Just tried a fourth run and rpm never exceeds 2000 rpm (actually 2407.75) even though I hit the limiter. Boost is showing in the range -10 to...
I love a neat bit of diy
Been trying to get a base boost curve from Torque Lite in readiness for some turbo messing. Tried three times now and still not succeeded. Why on...
Well spotted
Didn't expect it to be free, nice suprise.
Probably best your way
Welcome, don't need to take the dash out to fit a radio though. But read up on air bag safety if you do remove the dash, if you don't know how an...
42?
A tip is to pre stretch in obtuse areas like a wing mirror, then heat up and alow to shrink back else you'll have the edges lifting as soon as...
Will we need to pre register or pay anything beforehand.
7J is 1/2" wider than my 6.5J so would be approximately 1/4" further out than mine, should be well clear of steering problems. I could check my...
