1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Shopping for Wheels and Tires

Discussion in 'Modifications' started by james412, Feb 25, 2025.

Should i just stick with factory sizes

  1. yes

    0 vote(s)
    0.0%
  2. no- change it up

    0 vote(s)
    0.0%
  1. james412

    james412 Copenworld Newbie

    Joined:
    Feb 25, 2025
    Location:
    England
    Car(s):
    1.3 2008 copen
    Just wondering what people have done for wheels and tires. Im looking at trying to get a slightly bigger rim and wheel like a j6 and putting a 175or 195/50/15 on. Ideally a size where i can get a good set of Michelin on. Any advice on how big i can go for a bit more grip without messing up the way the car drives would be great ? :)
     
  2. ilbuonmarcio

    ilbuonmarcio Copenworld Newbie

    Joined:
    Jul 15, 2024
    Location:
    Verona, Italy
    Car(s):
    Daihatsu Copen L881K 1300cc straight piped and chiptuned, in the future I'm studying an engine swap with a 3SZ-VE
    I'm currently running on 185/45/15 and they feel better than the default ones, but I'm on Nankang's NS2
     
  3. james412

    james412 Copenworld Newbie

    Joined:
    Feb 25, 2025
    Location:
    England
    Car(s):
    1.3 2008 copen
    That is what i have decided to go for… do you know if you can fit a 16” wheel on the back and leave the fronts as 15”
     

Share This Page