1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Exhausts

Discussion in 'Problems, Fixes, Tips...' started by Number6, Nov 23, 2013.

  1. Number6

    Number6 Copenworld Veteran

    Joined:
    Apr 25, 2013
    Location:
    Dublin
    Car(s):
    2005 0.7L Copen
  2. Adam K

    Adam K Copenworld Guru

    Joined:
    Oct 27, 2010
    Location:
    Worcester, UK
    Car(s):
    Nissan Cube Kaizen
    You would be better finding a Stainless exhaust manufacturer near you.
    Your nearest Power flow exhaust supplier is:

    DUN LAOGHAIRE MOTOR WORX
    72A York Road
    Dun Laoghaire
    CO. DUBLIN
    Ireland TEL: 00353 1447 5248
    Email: dunlaoghaire@powerflowexhausts.co.uk;)

    They should be able to build one for you in a day. They would need to have the car. You should also be able to choose the tip design you want & how loud you want it.
     
  3. Number6

    Number6 Copenworld Veteran

    Joined:
    Apr 25, 2013
    Location:
    Dublin
    Car(s):
    2005 0.7L Copen
    Remind me to buy you a pint, Adam.
     
  4. Adam K

    Adam K Copenworld Guru

    Joined:
    Oct 27, 2010
    Location:
    Worcester, UK
    Car(s):
    Nissan Cube Kaizen
    :D

    No problem here to help. ;)
     
  5. Number6

    Number6 Copenworld Veteran

    Joined:
    Apr 25, 2013
    Location:
    Dublin
    Car(s):
    2005 0.7L Copen
    Ended up going to http://souhan.ie/ , which is in Trim.

    Might have needed a new exhaust, seeing as it was rotten.
    [​IMG]
    [​IMG]
    [​IMG]

    I've no photos of the new exhaust yet, but she'll be up on the ramp soon as I found an oil leak... And I am going to Hammerite a big part of the under body anyway.
     
  6. PauliePaul

    PauliePaul Copenworld Regular

    Joined:
    Oct 21, 2012
    Location:
    Bedford
    i changed my whole exhaust system back in april coz the tips rusted and fell off while driving LOL... but i havent seen an exhaust that rusty before and also near the hole looks like someones tried a cheap job of wielding a piece of metal over it too the brown retangle bit that sticks out :D
     
  7. Number6

    Number6 Copenworld Veteran

    Joined:
    Apr 25, 2013
    Location:
    Dublin
    Car(s):
    2005 0.7L Copen
    Yeah, it was a terrible weld job, and was also rotten to the core. That one hole was one of many - so an entire new system was called for.

    The mid box wasn't too bad, and could have been resused, but I still got it replaced. All in all (including emissions, brake shoes and a brake test) the cost was €425.

    What I was surprised at was the emissions report (54k miles) - 0.02% CO, and 39ppm HC!

    Edit: Oh, and the smoke that comes out of the new exhaust for the first few miles is fun - convinced a cloud was following me.
     
  8. Number6

    Number6 Copenworld Veteran

    Joined:
    Apr 25, 2013
    Location:
    Dublin
    Car(s):
    2005 0.7L Copen
    ScootyPuff passed the NCT (Irish MOT) - emissions are an order of magnitude below allowed levels!

    Won't have to do it now for another 2 years, then after that, it's every year.
     

Share This Page