1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cobra alarm immobiliser.

Discussion in 'Problems, Fixes, Tips...' started by NOMAD, Apr 15, 2019.

  1. NOMAD

    NOMAD Copenworld Newbie

    Mar 5, 2012
    Copen 1300.
    Alarms and immobilisers are ok until they stop working.
    Went to take the car out yesterday no alarm light flashing and no power to the ignition.
    Alarm not responding to the remote or the overide tag. Phoned Cobra tech they said the alarm was u/s and the main units can't be replaced because they have no spares. They said the only option was to have the car towed to an approved cobra installer and have a new one fitted £450+

    So decided to remove the alarm/immobiliser myself. It didn't help that to stop the car being hotwired all the original wiring has 3cm of cable removed from the cut section, plus about 10 all black cable's with no identification marks.

    Anyway, all fixed now and the car is running again.
    Pictures attached IMG_20190328_145952986.jpg

    Attached Files:

Share This Page