1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Air filter cold air feed induction kit part 2

Discussion in 'Introductions' started by bluebird32, Mar 8, 2015.

  1. bluebird32

    bluebird32 Copenworld Newbie

    Joined:
    Mar 1, 2015
    Location:
    london
    Car(s):
    daihatsu copen turbo
    Hi al capon mem part 2 take out 3x plastic fasteners from grill. bumper 6 x8m +2x10m bolts. 8 x plastic fasteners take out bulbs from holders then pull out bumper .3 bolts on old air box which Gives you access to oil filer after you loosen oil cooler 1 bolt you can just get filter out
    Was a fairly easy job with right tools biggest pain geting plastic fastener off without cracking bumper .I am happy with this replacement I can hear the dump valve .and engine its better for me I know what gear I am in without having to look f Just got to blank off a quarter part of grill so water don’t enter air filter.
    Roll on summer so I can look super cool:cool: while the neighbors :mad: are sweating in there tin tops ha ha:p
     

    Attached Files:

  2. threepot

    threepot Copenworld Regular

    Joined:
    Oct 8, 2014
    Car(s):
    Copen, Hijet, Celica, and Yaris!
    The only problem is, what if you have to drive through big puddles or standing water?
     
  3. bluebird32

    bluebird32 Copenworld Newbie

    Joined:
    Mar 1, 2015
    Location:
    london
    Car(s):
    daihatsu copen turbo
    Good point but I would remove grill turn filter upwards. But I personally would not let my car drown in water have a heart. don’t go through water higher then grill just turn round go back or pick up car put on back :eek:
     
data-ad-format="auto">

Share This Page